Blueenergy Build

Name: Blueenergy Build
Address: #9, Street 1, Czech Colony, Sanathnagar, Hyderabad, Telangana, 500018
Telephone: +91 9976854999

#9, Street 1, Czech Colony, Sanathnagar, Hyderabad, Telangana, 500018

Our Booking Policy
You are in safe hands with our team of highly qualified professionals specializing in groundwater investigation services. Please note that our investigation procedures are tailored to field conditions and may vary accordingly.

Services

GRAD for Groundwater Investigation

The resistivity (geophysical) method was applied in a gradient manner to analyze the subsurface characteristics of the selected land parcel. Geological, hydrogeological, hydrological, and satellite data interpretation studies were undertaken to evaluate the groundwater conditions in the area. By integrating the subsurface conditions and groundwater flow patterns from the surrounding areas, a comprehensive report will be generated. This report will detail the local groundwater conditions of the site, pinpoint locations for drilling new bore wells, and specify the depth, yield, and casing requirements. BlueEnergy's survey has garnered a satisfaction rate of over 98% from customers.

PQWT for Groundwater Investigation

3D for Groundwater Investigation

VES100 for Groundwater Investigation

VES150 for Groundwater Investigation

VES stands for Vertical Electrical Sounding. This is a measurement technique which collects resistivity data at different depths beneath a single surface location. It is most commonly used for water prospection, but it can be useful in many application areas. VES is a simple 1D resistivity technique where data are collected in one direction only. The surface position (the x- and y-location) remains fixed and only the depth of the data point varies (the z-position) during the survey. Primarily in regions of broad aquifers rather than water confined to narrow vertical joints/fracture zones. Groundwater investigation is carried out by Resistivity Sounding Method up to a depth of 150 m. In this service 3 locations will be surveyed and best point will be marked on the ground. This survey will be done by using DDR3 Equipment.